INDOOR ODOR SEAL CLEAR

$170.00

Introducing INDOOR ODOR SEAL CLEAR™, one of the newest additions to our INDOOR ODOR CONTROL NETWORK.. This urethane and acrylic polymer blended product locks-in/locks-out like not other product, with variable viscosity and tremendous coverage.

Net Contents: 1 U.S. Gallon (128 Fl. Oz)

4 Gallons Case

Category:

Description

Introducing INDOOR ODOR SEAL CLEAR™, one of the newest additions to our INDOOR ODOR CONTROL NETWORK.. This urethane and acrylic polymer blended product locks-in/locks-out like not other product, with variable viscosity and tremendous coverage. It may be wiped on, sprayed on, spread on or mopped on with coverage rates from 600-1800 sf/gal depending of a variety of factors.

PRIMARY APPLICATIONS:

Vinyl Composite Tile & Bare Wood Floors
INDOOR ODOR SEAL CLEAR™ provides the perfect answer for sealing freshly cleaned walls and trim after a mold, mildew or smoke & odor remediation treatment, especially when the substrate is rough or porous like construction grade timbers or plywood. Depending on your available equipment, INDOOR ODOR SEAL CLEAR™ can be applied at full-strength or reduced by not more than 1:1 with clear water. This opens up the possibility for application with airless or air-powered spraying, wiping, brushing or application to floors with microfiber.

OTHER APPLICATIONS:

Vinyl Composite Tile & Bare Wood Floors
These floor covering have long eluded clear directions for long-term maintenance. With a reduced and thin coat of INDOOR ODOR SEAL CLEAR™ these floors will wear better, clean easier and last longer.

Vinyl Composite Tile & Bare Wood Floors
VCT contains a high percentage of clay, which like wood, is very porous. Without a penetrating sealer, coatings and cleaners will not function as promised, a full strength coat of INDOOR ODOR SEAL CLEAR™ ends the porosity.

Additional Information

APPLICATION OVERVIEW:

Think of INDOORODORSEAL CLEAR™ as just that… a SEALER. Its main purpose is to SEAL IN (residual odor-causing material that can only be removed by further substrate destruction) and to SEAL OUT the moisture and microbes that causes odor and discoloration.

As mentioned elsewhere, this product may be applied in a number of manners.

APPLICATION INSTRUCTIONS:

Sealing Walls & Trim Against Odor Reoccurrence – Think of this product as a base-sealer for OdorProTec or SilverShield for when surfaces are too porous for a single application. If applying with roller, pad or microfiber, use straight. If applying with an airless sprayer, reduce with water (not more than 1:1) to achieve a consistent spray and good coverage.

Sealing Timbers, Boarding Boards and Plywood in Attics & Crawl Spaces – Please use equipment with sufficient power so that this product need not be reduced while spraying overhead. Apply with successive thin applications directly over top of the prior with little set time. Do not attempt to apply in a single application. Product should quickly go from white to clear when applied properly.

Sealing VCT, Concrete or Ceramic Tile with Grout – Use as supplied and apply with a microfiber finish mop. Apply thin coats and not more than two coats before covering with EnviroBuild Floor Finish.

Reviews

There are no reviews yet.

Be the first to review “INDOOR ODOR SEAL CLEAR”

Your email address will not be published. Required fields are marked *