INDOOR ODOR MOLD SHIELD
$405.00
When we hear MOLD, we think ‘GO PROACTIVE – GO NATURAL’! Whether it is a remediation or a new construction, wherever there IS mold, there WAS moisture. They come hand-in-hand, and when it comes to protecting surfaces against both, there is nothing better than our All-Natural, Bio-Static, Surface-Protecting INDOOR ODOR MOLD SHIELD™ .
Net Contents: 1 U.S. Gallon (128 Fl. Oz)
4 Gallons Case
Out of stock
Description
When we hear MOLD, we think ‘GO PROACTIVE – GO NATURAL’! Whether it is a remediation or a new construction, wherever there IS mold, there WAS moisture. They come hand-in-hand, and when it comes to protecting surfaces against both, there is nothing better than our All-Natural, Bio-Static, Surface-Protecting INDOOR ODOR MOLD SHIELD™ . This new product has been developed from ingredients as old as the Earth and able to create an uncommon level of protection against both moisture and microbes.
INDOOR ODOR SILVER SHIELD™ IS:
- An All-Natural Bio-Polymer, which forms a water-shedding shield over both hard and soft surfaces;
- A Bio-Static Antimicrobial, which uses electrical charges that prevents fungus (mold), bacteria and other microbes from maintaining critical metabolism when in contact with the protected surface.
- A rigid, yet penetrating hydro-phobic coating and sealer that is only removed by friction, so in attics and crawl-spaces it will last seemingly forever.
- A Concentrate, able to produce 12 gallons of Ready-to-Use Protection from each case you purchase
Additional Information
PRODUCT USE DIRECTIONS
SURFACE & AREA PREPARATION:
- If new construction, when proactive protection is required, simply ensure that the surfaces are clean, and dust-free.
- If being applied to a mold-contaminated surface, then treat the surface with GOLD4 MOLD™ to remove surface discoloration, followed by a 400 ppm solution of ClO2 created with ENVIROTAB™ and allow to air-dry.
PRODUCT PREPARATION:
- Please use PPE’s as shown on label before mixing or applying this product.
- Into a clean container, add 1 gallon of INDOOR ODOR MOLD SHIELD™ for every 3000 square feet of surface area, and then add (2) gallons of water and mix thoroughly. [This product may be applied straight from the container, if using an airless paint sprayer.]
- You are now ready to pour from this container into your battery or corded spray application tool.
PRODUCT APPLICATION:
- For best performance, temperature should be between 40o F – 80o F.
- Using your battery or corded sprayer, adjust the pressure, volume and nozzle to obtain an even pattern that is as heavy as possible, but without drips.
- Apply to all new or previously contaminated surfaces using a dual coat that comes from two perpendicular directions – up and down, side-to-side. Apply a thin, even coat that covers all surfaces and corners.
- The product will bind to all dry surfaces and requires no additional curing tools or actions. Two coats is recommended to ensure full coverage.
- If the surfaces are particularly porous, you might consider first applying a coat of INDOOR ODOR SEAL CLEAR™ to fill pores, followed by a single application of INDOOR ODOR MOLD SHIELD™.
- Allow to air dry and enjoy solid, natural protection against recontamination.
Reviews
There are no reviews yet.