INDOOR ODOR GOLD4 MOLD

$109.00

The INDOOR ODOR CONTROL NETWORK is proud to introduce GOLD4 MOLD INDOOR ODOR™ as a new and integral part of our Mold Remediation & Odor Control line-up of products.

Net Contents: 1 U.S. Gallon (128 Fl. Oz)

4 Gallons per case

Category:

Description

The INDOOR ODOR CONTROL NETWORK is proud to introduce GOLD4 MOLD INDOOR ODOR™ as a new and integral part of our Mold Remediation & Odor Control line-up of products. This new product is specifically designed for use in attic spaces, the deep stains which develops in areas like crawl spaces – where years of standing water and poor ventilation has badly embedded the stains associated with mold into floor joists and subflooring, can only be eliminated by a Sodium Hypochlorite product.

GOLD4 MOLD INDOOR ODOR™ Liquid Mold Stain Remover is a concentrate and may be mixed as follows:

  • For light stain removal, dilute 1 gallon of GOLD4 MOLD to 2 gallons of water
  • For heavy stain removal, dilute 1 gallon of GOLD4 MOLD to 1 gallon of water
  • DO NOT EVER USE THIS PRODUCT STRAIGHT FROM THE BOTTLE
  • For reduced odor, and deep surface penetration, add 1oz of Soil BreakTM per each gallon of prepared solution.

Additional Information

PRODUCT USE DIRECTIONS

SURFACE & AREA PREPARATION:

  1. All surfaces should be vacuumed (HEPA) free of all visible surface mold fruit.
  2. If being applied in an attic space, insulation or floor decking should be protected with plastic sheeting.
  3. Protect critical metal components that may corrode when in contact with salt.
  4. A means of fresh air intake and powered exhaust should be set up to evacuate fumes from product.

PRODUCT PREPARATION:

  1. PPE as shown on this label should be use whenever handling or applying this product.
  2. Into a clean 2-3 gallon pump or battery sprayer add 1-2 gallons of lukewarm clean water. See chart on label
  3. Not less than 1 gallon should be added to the 2-3 gallon pump or battery sprayer. Product is to be applied as a liquid, not atomized through a power fogger or sprayer.
  4. For increased vertical surface cling and substrate penetration, add 1oz of Soil Break™ for each gallon of prepared solution and use a foaming pump sprayer.

PRODUCT APPLICATION:

  1. For best performance, temperature should be between 40o F – 80o F.
  2. Use pump sprayer or foamer to apply the diluted solution directly to the stained surfaces. Saturation is NOT necessary. Require dwell-time to remove discoloration should be 5 minutes or less
  3. Agitate with a brush to work solution into particularly badly stained or porous surfaces.
  4. Rinsing should not normally be required. Allow to air dry.
  5. For additional insurance against recontamination, retreat particularly bad surfaces with INDOOR ODOR CONTROL™ TABLETS to eliminate root development and INDOOR ODOR SILVER SHIELD™ Bullet to add long-lasting antimicrobial protection.

Reviews

There are no reviews yet.

Be the first to review “INDOOR ODOR GOLD4 MOLD”

Your email address will not be published. Required fields are marked *