INDOOR ODOR CRETE SHINE

INDOOR ODOR CRETE SHINE™ is not specifically a cleaner, and not specifically a coating. It is designed to improve gloss, improve slip-resistance and reduce soil retention all while you clean.

Net Contents: 1 U.S. Gallon (128 Fl. Oz)

Category:

Description

INDOOR ODOR CRETE SHINE™ is not specifically a cleaner, and not specifically a coating. It is designed to improve gloss, improve slip-resistance and reduce soil retention all while you clean. For best results, INDOOR ODOR CRETE SHINE™ should always be use in programs that include the use of automatic scrubbers and high speed burnishers.

Here are just a few of its viable uses (directions will be detailed on the other end of this label):

Building & Maintaining Gloss on Polished Stone Floors

The first and most remarkable application for INDOOR ODOR CRETE SHINE™ lies in its ability to work together with Crete Seal™ and a diamond pad system to build a floor substrate coating that NEVER requires stripping*.

Improving Slip-Resistance to All Hard Floor Surfaces

Proprietary ingredients in INDOOR ODOR CRETE SHINE™ have been proven to increase the SCOF [Slip-Coefficient Of Friction] by at least 10-20 points with regular use, reducing the likelihood of Slip & Fall Accidents.

Maintaining Finished VCT, Sealed LVT & Johnsonite Rubber Floors

Floors cleaned with automatic scrubbers containing even 1oz/gal of INDOOR ODOR CRETE SHINE™ have been known to hold their shine longer and show far fewer traffic lanes.

Additional Information

APPLICATION INSTRUCTIONS:

Automatic Scrubbing
On floors freshly sealed with Crete Seal™, dilute INDOOR ODOR CRETE SHINE™ at a rate of 2-4oz per gallon, and use a brush, white or red poly pad, or on VCT, a 1500 grit diamond polishing pad. After 1-2 weeks, reduce the concentration to just 1oz per gallon. Burnish after scrubbing with a 2000-3000grit diamond or Hi-Speed Natural pad.

Traffic Lane Restoration
For the highest traffic lanes and areas, dilute (at 2-4oz/gal) and apply a thin application of INDOOR ODOR CRETE SHINE™ with a microfiber flat mop and allow to dry thoroughly before burnishing.

Finished VCT, Sealed LVT & Johnsonite Rubber Floors
Dilute INDOOR ODOR CRETE SHINE™ at 1oz/gal and clean floor with an automatic scrubber with a brush or white or red floor pad.

Reviews

There are no reviews yet.

Be the first to review “INDOOR ODOR CRETE SHINE”

Your email address will not be published. Required fields are marked *