INDOOR ODOR CRETE SEAL
Introducing INDOOR ODOR CRETE SEAL™, our high quality, water-based urethanes and acrylic polymers that locks-in/locks-out like no other product, with an almost endless number of uses. With low, penetrating viscosity and tremendous coverage, you may be assured of 2000-3000 ft2 per gallon of product.
Net Contents: 1 U.S. Gallon (128 Fl. Oz)
Description
Introducing INDOOR ODOR CRETE SEAL™, our high quality, water-based urethanes and acrylic polymers that locks-in/locks-out like no other product, with an almost endless number of uses. With low, penetrating viscosity and tremendous coverage, you may be assured of 2000-3000 ft2 per gallon of product.
Here are the reasons to choose CreteSeal: (directions will be detailed on the other end of this label):
Deep Penetrating
INDOOR ODOR CRETE SEAL™ dives deep into the porous surfaces of all types of stone and concrete floors with proprietary, low-viscosity acrylic-urethane sealer.
Creates Water-Resistant Conditions
A thin application of INDOOR ODOR CRETE SEAL™ to new or restored tile & grout will improve the hydrophobic (water-repelling) nature that you want to keep soils and germs from embedding deep within the substrate.
Better than Densifiers
Traditional Lithium Silicate densifiers have had a long history of placing stress upon concrete floors causing ‘spidering’ – thousands of fine fissures in concrete, not so with INDOOR ODOR CRETE SEAL™.
Perfect for Any Stone or Concrete Floor
INDOOR ODOR CRETE SEAL™ is the perfect solution for any hard floor surface that has not previously responded well to other methods. Use it on concrete, terrazzo, grouted tile and more. Completely compatible with diamond maintenance systems.
Additional Information
APPLICATION OVERVIEW:
INDOOR ODOR CRETE SEAL™ is not a coating, it is a deep-penetrating sealer and must always be applied in such a way as to leave the very least amount of surface film. This product may be applied by hand with a cloth, by microfiber flat mop or with an airless sprayer, so long as the solution is pushed into any pores and not allowed to build up on the surface.
APPLICATION INSTRUCTIONS:
Large Area Applications – This product must be applied in THIN, even coats, so for large areas, we heartily recommend the use of a Fas-Trak Ultra-Trak for metered application.
Sealing Ceramic Tile & Grout – On a pre-cleaned and dry surface, apply a thin application of INDOOR ODOR CRETE SEAL™ to new or restored tile & grout with a cloth, mop or sponge and watch the grout for a color change that indicates penetration. Wipe dry with a terry cloth.
Small Areas & Touch-ups – For small area, traffic lanes (where the substrate has been worn away) and touch-ups, we recommend the use of low-nap microfiber mops.
Cleaning & Top-Dressing Maintenance Instructions – For floors regularly cleaned with automatic scrubbers, and/or frequently burnished. Clean regularly with INDOOR ODOR CRETE SHINE™ and burnish with diamond pads.
Reviews
There are no reviews yet.